If you don't have the time or even budget to buy individual solar system components, then a Hybrid solar inverter is possibly the answer.
These inverters contain everything in one single unit, including MTTP solar charge controllers, even battery chargers.
They offer a very cost efficient solution if your looking for an all in one solution to off grid power requirements.
You can have these systems up and running in under an hour!
They are cheaper than buying individual components & easily programmed to your requirements.
They come in 12v, 24v & 48v sizes for your battery system.
Choose one to suit your battery voltage, solar input voltage and inverter wattage requirements.
Remember! Any inverter connected to the main grid will need to be approved by your network operator using G98, G99 or G100 applications.
Check the downloads page for information on these forms.
IMPORTANT!..To avoid larger sparks and high inrush currents, please always use a resistor to pre-charge the internal capacitors of your inverter before connecting your battery! Available HERE from Amazon.
Q..What are the differences between an OFF GRID INVERTER & HYBRID INVERTERS?
A..An off-grid inverter draws power from a charged battery, converts direct current (DC) to alternating current (AC), and supplies it to a household.
It is designed for complete energy independence and autonomy, especially in remote locations.
Unlike hybrid inverters, an off-grid inverter cannot feed power back into the utility grid.
It can be connected to an external AC backup source (such as a generator or the utility grid) but does not interact with the grid directly.
Whereas, a HYBRID INVERTER connects to both the utility grid and a solar system battery pack.
Some, but not all hybrid inverters can also feed power back into the utility grid when there’s a surplus. They can usually also be connected to an external AC backup source (like a generator or grid)
2000W 24V pure sine wave inverter, 50A solar charge controller and a fast 20A smart battery charger in one single unit.
This Grid-Tied Inverter from Growatt has the following features -
Hybrid Solar Inverter From Eco-Worthy
2400W 24V Hybrid Inverter with pure sine wave inverter. Max PV input 80Vdc
5000W 48V pure sine wave inverter, 80A solar charge controller and a fast 80A smart battery charger in one single unit
Rated power: 4000W
DC input: 48 V DC, 87 A.
AC output voltage: 230 V, 50 Hz, 22 A.
AC charging mode: Input: 230 VAC, 50 Hz, 36 A.
DC output: 54 V DC, 10-60 A.
Solar charging mode:
Rated power: 3000W
System voltage: 48VDC
Max . Solar voltage (VDC): 145VDC
All You Need Are:-
(1)..Solar Panels
(2)..Hybrid Inverter (12V/24V/48V)
(3)..Batteries to Store Energy
You May Require DNO Approval, Be Sure To Check Before Installing.
Hybrid Systems Contain All you need!